Osteoink. © is a composite bioink containing bone and dental minerals, designed for 3D bioprinting of hard tissues. With excellent mechanical properties and tunable biodegradability, it promotes cell proliferation and differentiation while creating scaffolds that guide bone growth.
categories Bioinks, Non-Cell-laden Bioinks
In this section, you can read the full description of the product, its features, and key benefits to become familiar with the product’s function and true value.
Osteoink© bio-ink is a composite made from the mineral components found in bone and teeth. Its excellent mechanical properties and tunable biodegradability make this bio-ink a suitable option for 3D bioprinting of hard tissues. The presence of mineral components in this composite also enhances its bioactivity and promotes bone growth within printed scaffolds. Osteoink© mimics the natural extracellular matrix of bone tissue, supporting cell proliferation and differentiation.
For more information, please contact the company or complete the contact form .
Further suggestions
Low-temperature print bed module
This module enables control of the print bed temperature at a level lower than ambient temperature.
Automatic calibration module
The accuracy and speed of preparing the bioprinter are two key factors in the success of bioprinting, especially when printing complex geometries. When using multiple print modules, manual calibration of the device is a tedious task. The automatic calibration module performs all tasks related to device preparation, calibration, and adjustments automatically.
Electrospinning module
Electrospinning is one of the oldest and most widely used methods in tissue engineering, enabling researchers to produce nanofibers with very small diameters. However, limited precision in microfiber placement and inherent constraints in fabricating true three-dimensional tissues have led to reduced emphasis on this technique in modern tissue engineering. By using the Melt Electrowriting module, the advantages of electrospinning and bioprinting can be integrated within a single system. This approach compensates for the limitations of conventional electrospinning and enables the bioprinter to fabricate extremely fine and highly precise tissue structures. The use of Omid Afarinan’s high-temperature module alongside this module is recommended.
Imaging module
The imaging module enables capturing images of the printed structure during and after bioprinting. This module allows examination of the printed structure without removing it from the print environment, thereby increasing the speed and quality of structure printing. Unlike many European and American bioprinters, this module does not occupy the position of one of the print modules when installed, allowing the user to utilize all printer modules for material printing.
Coaxial printing module
By installing this module, coaxial printing from 2 to 4 cartridges mounted on the bioprinter becomes possible simultaneously.
Syringe printing module
This module is an ideal choice for printing low-viscosity materials. With precise pressure control, it reduces the shear stress applied to the bioink, thereby improving cell viability.
Related products
Softink
Soft-ink. © is a biocompatible and biodegradable gelatin-based bioink developed for 3D bioprinting of soft tissues. It supports cell growth and enables high-printability fabrication of uniform micro-scale fibers for applications such as skin, cartilage, and corneal tissue engineering.
GelMA© Bioink
GelMA. © is a gelatin-based bioink that supports cell growth and proliferation by mimicking the extracellular matrix. It crosslinks under UV light in the presence of a photoinitiator, with methacryloyl groups enabling control over hydrogel properties such as pore size, swelling, and degradation.
Apatite©
Apatite© bioink,. developed by OmidAfarinan, is designed for bone tissue engineering. It contains hydroxyapatite (HA) nanoparticles uniformly distributed within 3D bioprinted scaffolds, reinforcing the collagen matrix.. Apatite© has also been certified at the nanoscale by the National Nanotechnology Initiative.
ColGel©
ColGel. © is a bioink based on type I collagen and gelatin methacrylate, featuring unique optical and biochemical properties that enable the fabrication of personalized scaffolds and corneal implants, including artificial lenses.
AllGBone©
AllGBone. © is a unique bioink by OmidAfarinan, made from human bone extracellular matrix combined with natural polymers. Biocompatible and biodegradable, it exhibits strong osteoinductive and osteoconductive properties, playing a key role in repairing damaged bone tissue and supporting new cell growth.
Mineral©
Mineral. © is a specialized bioink by OmidAfarinan, composed of minerals similar to the natural bone phase, promoting early-stage bone formation. The 3D-printed scaffolds are fully ceramic and gradually degrade, being replaced by new bone tissue.
Osteoink©
Osteoink. © is a composite bioink containing bone and dental minerals, designed for 3D bioprinting of hard tissues. With excellent mechanical properties and tunable biodegradability, it promotes cell proliferation and differentiation while creating scaffolds that guide bone growth.
