Mineral. © is a specialized bioink by OmidAfarinan, composed of minerals similar to the natural bone phase, promoting early-stage bone formation. The 3D-printed scaffolds are fully ceramic and gradually degrade, being replaced by new bone tissue.
categories Bioinks, Non-Cell-laden Bioinks
In this section, you can read the full description of the product, its features, and key benefits to become familiar with the product’s function and true value.
Bone tissue consists of two phases: mineral and organic. The mineral phase accounts for 60–70% of the total dry weight of bone. Calcium phosphate bioceramics are particularly important for bone repair due to their structural similarity to the mineral phase of bone. Mineral© bio-ink is a specialized product developed by Omidafarinan, designed with minerals similar to natural bone tissue to promote early-stage osteogenesis. Scaffolds printed with this bio-ink are 100% ceramic and gradually degrade during bone regeneration, eventually being replaced by new bone.. .
technichal informations:
| title | Description |
|---|---|
| Name | Mineral© |
| Appearance | White paste |
| Packaging | 10 mL cartridge |
| Storage conditions | Completely sealed and protected from air |
| Shelf life | 1 week |
| Sterility | Printed scaffolds can be sterilized using various methods |
| Application | Bio-ink for 3D bioprinting, materials science, tissue engineering, and drug delivery, especially for hard tissues |
For more information, please contact the company or complete the contact form .
Further suggestions
Low-temperature print bed module
This module enables control of the print bed temperature at a level lower than ambient temperature.
Automatic calibration module
The accuracy and speed of preparing the bioprinter are two key factors in the success of bioprinting, especially when printing complex geometries. When using multiple print modules, manual calibration of the device is a tedious task. The automatic calibration module performs all tasks related to device preparation, calibration, and adjustments automatically.
Electrospinning module
Electrospinning is one of the oldest and most widely used methods in tissue engineering, enabling researchers to produce nanofibers with very small diameters. However, limited precision in microfiber placement and inherent constraints in fabricating true three-dimensional tissues have led to reduced emphasis on this technique in modern tissue engineering. By using the Melt Electrowriting module, the advantages of electrospinning and bioprinting can be integrated within a single system. This approach compensates for the limitations of conventional electrospinning and enables the bioprinter to fabricate extremely fine and highly precise tissue structures. The use of Omid Afarinan’s high-temperature module alongside this module is recommended.
Imaging module
The imaging module enables capturing images of the printed structure during and after bioprinting. This module allows examination of the printed structure without removing it from the print environment, thereby increasing the speed and quality of structure printing. Unlike many European and American bioprinters, this module does not occupy the position of one of the print modules when installed, allowing the user to utilize all printer modules for material printing.
Coaxial printing module
By installing this module, coaxial printing from 2 to 4 cartridges mounted on the bioprinter becomes possible simultaneously.
Syringe printing module
This module is an ideal choice for printing low-viscosity materials. With precise pressure control, it reduces the shear stress applied to the bioink, thereby improving cell viability.
Related products
Softink
Soft-ink. © is a biocompatible and biodegradable gelatin-based bioink developed for 3D bioprinting of soft tissues. It supports cell growth and enables high-printability fabrication of uniform micro-scale fibers for applications such as skin, cartilage, and corneal tissue engineering.
GelMA© Bioink
GelMA. © is a gelatin-based bioink that supports cell growth and proliferation by mimicking the extracellular matrix. It crosslinks under UV light in the presence of a photoinitiator, with methacryloyl groups enabling control over hydrogel properties such as pore size, swelling, and degradation.
Osteoink©
Osteoink. © is a composite bioink containing bone and dental minerals, designed for 3D bioprinting of hard tissues. With excellent mechanical properties and tunable biodegradability, it promotes cell proliferation and differentiation while creating scaffolds that guide bone growth.
Alginate©
Alginate. © is a polymer-based bioink that provides an optimal environment for cell viability and printing. It crosslinks in the presence of calcium ions and can be combined with other bioinks to fabricate complex structures.
PCL©
Polycaprolactone (PCL) is a biocompatible thermoplastic polymer with slow degradation and suitable mechanical properties for 3D printing of bone and dental tissues. This ready-to-use bioink, meeting medical standards, is compatible with OmidAfarinan bioprinters and other high-temperature 3D printers.
AllGBone©
AllGBone. © is a unique bioink by OmidAfarinan, made from human bone extracellular matrix combined with natural polymers. Biocompatible and biodegradable, it exhibits strong osteoinductive and osteoconductive properties, playing a key role in repairing damaged bone tissue and supporting new cell growth.
Mineral©
Mineral. © is a specialized bioink by OmidAfarinan, composed of minerals similar to the natural bone phase, promoting early-stage bone formation. The 3D-printed scaffolds are fully ceramic and gradually degrade, being replaced by new bone tissue.
